Flipper Zero compatible Marauder/NRF24/CC1101: 3-in-1 Device with SD Card Slot and Antenna Options
Flipper Zero compatible Marauder/NRF24/CC1101: 3-in-1 Device with SD Card Slot and Antenna Options
This is a combo board that has three components, CC1101, NRF24+PA+LNP, and WRoom, called Marauder. The board has an antenna option and is fully working and custom-built. It is loaded with the latest firmware and has been fully tested. However, the color of the wires and board may vary. Please feel free to ask any questions you may have.
It's important to note that this board requires either Unleashed or Xtreme firmware and a FlipperZero device (which is not included) to function.
To use the Marauder board with your Flipper Zero device, press the OK button to access the menu. Navigate to "GPIO" and select it. Scroll down and turn on "5v on GPIO" by pressing the right button. Press the back button once and select "Applications". Scroll down and select "GPIO". Choose the appropriate program for your device by pressing OK:
[ESP32] Wifi Marauder for all ESP32 and WROOM devices.
[NRF24] Sniffer for all NRF24 devices.
For Unleashed or Xtreme firmware only, turn on 5v under GPIO and then go to the SubGhz menu and select external antenna.
Please note that the side closest to the SubGhz and NRF24 module is for the SubGhz option. Plug in the side with the WRoom on the bottom for Marauder and NRF24 Scanning/payloads. See pictures for reference.
Please remember to turn on 5v under GPIO for all operations.
This hardware is intended for educational and experimental purposes only, and it is not meant for any illegal activity. It is strongly recommended that any transmissions made using this device comply with the law and valid educational or experimental uses only.
Please be advised that the products sold here are third-party items that are compatible with the Flipper Zero. These products are not manufactured, endorsed, or affiliated with Flipper Devices Inc. in any way. The use of the "Flipper Zero" name in our product descriptions is for identification purposes only, to demonstrate the compatibility of our products with the mentioned device.