DIY ESP32-S3-WROOM WiFi Custom Board with Marauder Firmware Loaded compatible with Flipper Zero

This is a DIY Package for you to make a custom-built ESP32-S3-WROOM WiFi board running Marauder that is designed to work with Flipper Zero. Includes everything you need to build your own except the solder and soldering iron. It allows you to make your own and comes with detailed instructions.

Includes: 

Header Pins - 1, 8 pin and 1, 10 pin
Board - Board to attach your project to
ES32-S3 Chip - Programmed with Marauder
Wires to connect your project and make the paths

To use the Marauder board with your Flipper Zero device, press the OK button to access the menu. Navigate to "GPIO" and select it. Scroll down and turn on "5v on GPIO" by pressing the right button. Press the back button once and select "Applications". Scroll down and select "GPIO". Choose the appropriate program for your device by pressing OK:

[ESP32] Wifi Marauder for all ESP32 and WROOM devices.
Please remember to turn on 5v under GPIO to ensure the board works correctly.

It's important to note that this board requires either Unleashed or Xtreme firmware and a Flipper Zero device (which is not included) to function.

This hardware is intended for educational and experimental purposes only, and it is not meant for any illegal activity. It is strongly recommended that any transmissions made using this device comply with the law and valid educational or experimental uses only.

Please be advised that the products sold here are third-party items that are compatible with the Flipper Zero. These products are not manufactured, endorsed, or affiliated with Flipper Devices Inc. in any way. The use of the "Flipper Zero" name in our product descriptions is for identification purposes only, to demonstrate the compatibility of our products with the mentioned device